You are here: Home > GRP Tanks
GRP cold water tanks, potable, one piece, two piece and sectional water tanks, WRAS approved water storage tanks.
A vast range of tank accessories including float valves, overflows, outlets, level monitoring & level control equipment, tank foundations & support frames, ladders, drip trays and more.
We can also provide process cooling tanks for industrial process cooling applications, suitable for solutions at a working temperature of -15c. |
|
GRP Tanks - Un-Insulated
GRP Tanks - Un-Insulated
The Un-insulated tanks are manufactured with WRAS approved materials. If however you require a FULL WRAS approved tank please see our one and two piece insulated tanks.
|
 |
|
|
|
GRP Tanks - One Piece Insulated
GRP cold water tanks - One Piece Insulated
One piece cold water storage tank manufactured from GRP materials. Fully encapsulated insulation to sides and lid. Close fitting and sealed lid which is removable for maintenance.
Full WRAS approval 0809038.Suitable for all cold water applications including:
Potable & Non Potable water storage. Process water (including process cooling) applications -15º to +30º c. U Value 0.8
|
|
|
|
|
GRP Tanks - Two Piece Insulated
GRP Tanks - Two Piece Insulated
Two piece cold water storage tank manufactured from GRP materials.
Fully encapsulated insulation to sides and lid. Close fitting and sealed lid which is removable for maintenance.
Full WRAS approval 0809038.Suitable for all cold water applications including:
Potable & Non Potable water storage. Process water (including process cooling) applications -15º to +30º c
|
|
|
|
|
Raised Float Valve Housings
Raised float valve housings, retro fit, type AB air gap with weir overflow, retro-fit, for Equilibrium valve, Aylesbury KB valve, KP valves
|
|
|
|
|
Tank Connectors
Flanged tank connectors manufactured from PVC.
Two ranges available:
Standard duty back-nut type which are fitted to the tank with a hexagon nut inside and outside the tank wall. This type of tank connector are suitable for most applications.
The range is available from 1/2" up to and including 4".
Fully flanged type which are fitted to the tank with heavy duty internal and external flanges which are secured to the tank wall with M12 stainless steel fixings. Fixings and sealant are supplied. This type of tank connector enables a more secure seal to the tank wall and is suitable for more industrial applications.
The range is available from 2" up to and including 12".
All supplied complete with EPDM gasket, stub flange and galvanised steel backing ring drilled to NP16 configuration. The stub flange is supplied loose, requiring a solvent cement joint to be made by others.
|
|
|
|
|
Float Valves - Equilibrium - Straight Arm
Float Valve Equilibrium.
A range of quality high flow rate Float Valves which are simple and robust and can reliably self-compensate for changes in water supply pressures.
One size of seat and one size of ball float will suit any working pressure up to the maximum recommendation of 5bar.
Even at these pressures the seat combined with the hydraulically balanced closing action gives fast, quiet and smooth shut-off.
Valves are available in 1/2” to 4” sizes with BSP male threaded inlet stub.
|
|
|
|
|
Float Valves - Equilibrium - Cranked Arm
Equilibrium Float Valve
A range of quality high flow rate Float Valves which are simple and robust and can reliably self-compensate for changes in water supply pressures.
One size of seat and one size of ball float will suit any working pressure up to the maximum recommendation of 5bar.
Even at these pressures the seat combined with the hydraulically balanced closing action gives fast, quiet and smooth shut-off.
Valves are available in 1/2” to 4” sizes with BSP male threaded inlet stub.
|
|
|
|
|
